Due to the demand for 2021 bikes due to COVID and distribution interruptions, the 2021 bike models have become very limited. We are now taking preorders for 2022 bikes and frames. If you preorder before 2022, we honor 2021 pricing. 

Note: 2022 models may have changed from the 2021 models.  

The expected delivery is April 2022 for this item
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.

To optimize the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fiber frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.

Speed or play: which do you value more? The maneuverability of 27.5” or the raw speed of a 29”?

All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.

  • Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
  • Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximize the descending capabilities.

To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tire to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.

FEATURES

  • Aggressive Trail Bike
  • 130mm Rear Travel
  • 2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
  • 148mm Boost rear spacing
  • Sizes Available: Medium, Large, Extra Large

FULL SPECS

COMP PRO FRAME ONLY
FRAME Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fiber Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fiber Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fiber Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
FORK Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black (SHORT ID: D6S2) RockShox Pike Select + Charger 2 RC 140mm, 42mm Offset, BOOST, Debonair, Gloss Black
SHOCK RockShox Super Deluxe Select R, Custom ML Tune, 210x50mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Select+ RT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted
FRONT WHEEL Sun-Ringle Duroc 35 Comp 29", 15x110mm Nukeproof Neutron V2 29", Tubeless Ready, 32h, 110x15mm
REAR WHEEL Sun-Ringle Duroc 35 Comp 29", Shimano Microspline Driver, 148x12mm Nukeproof Neutron V2 29", Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm
TYRES Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR
CRANKSET Shimano Deore M6100 12 Speed Crank, 170mm, 30T, 52mm Chainline : SRAM GX Eagle 12-Speed, 170mm, 30T, B148, DUB
SHIFTER Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV SRAM GX Eagle 12-Speed
REAR DERAILEUR Shimano Deore M6100, SGS 12-Speed, Shadow Plus SRAM GX Eagle 12-Speed
CHAIN Shimano Deore M6100 12-Speed SRAM GX Eagle 12-Speed
CASSETTE Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T
BRAKES Shimano Deore M6120 4 pot brake, Resin Pads SRAM Guide RE
FRONT ROTOR Shimano SM-RT66, 203mm SRAM Centreline, 200mm
REAR ROTOR Shimano SM-RT66, 180mm SRAM Centreline, 180mm
HANDLEBARS Nukeproof Neutron V2 25mm Rise, Width - M780mm, L800mm, XL800mm) Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm)
STEM Nukeproof Neutron AM, 45mm, black Nukeproof Neutron AM, 45mm, black
SADDLE Nukeproof Horizon SL, Black Nukeproof Horizon SL, Black
SEATPOST Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop
HEADSET Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS
GRIPS Nukeproof Sam Hill Signature Nukeproof Sam Hill Signature
BEARINGS Enduro Bearings Enduro Bearings Enduro Bearings
WEIGHT (SIZE MEDIUM) 15Kgs/33lbs (Tubeless) 14.4Kgs/31.7lbs (Tubeless) 3.77Kgs/8.3lbs (Medium)

GEOMETRY & SIZING

 

MEDIUM LARGE X-LARGE X-LARGE
(A) REACH 451 480 514 514
(B) STACK 615 620 625 625
(C) EFFECTIVE TOP TUBE LENGTH 610 640 675 675
(D) SEATTUBE LENGTH 420 458 508 508
(E) EFFECTIVE SEATTUBE ANGLE 75.5°
(Low 75°)
75.5°
(Low 75°)
75.5°
(Low 75°)
75.5°
(Low 75°)
(F) SEATTUBE ANGLE (ACTUAL) 71°
(Low 70.5°)
71°
(Low 70.5°)
71°
(Low 70.5°)
71°
(Low 70.5°)
(G) SADDLE HEIGHT AT SADDLE OFFSET 700 750 850 -
(H) SADDLE OFFSET AT SADDLE HEIGHT 180.11 196.07 228.33 -
(I) HEADTUBE LENGTH 105 110 115 115
(J) HEADTUBE ANGLE 66°
(Low 65.5)
66°
(Low 65.5)
66°
(Low 65.5)
66°
(Low 65.5)
(K) CHAINSTAY LENGTH 440 440 440 440
(L) FRONT CENTRE 762.5 792 830 830
(M) WHEELBASE 1205 1235 1271 1271
(N) BOTTOM BRACKET DROP -33
(Low -39)
-33
(Low -39)
-33
(Low -39)
-33
(Low -39)
(O) BOTTOM BRACKET HEIGHT 336
(Low 330)
336
(Low 330)
336
(Low 330)
336
(Low 330)
(P) STAND OVER HEIGHT 733/728 728/735 736/741 769 (High)
(Q) FORK TRAVEL 140 140 140 140
(R) TRAIL 108.62 108.62 108.62 -
(S) FORK OFFSET 44 44 44 44
(T) AXLE TO CROWN 554 554 554 554
(U) MAXIMUM SEATPOST INSERT 215 250 300 300

*All dimensions in mm unless otherwise stated

RECOMMENDED SIZING


HELP

  • FAQs
  • Frame Spec
  • Tech Docs
Material: Hydroformed 6061 Triple-Butted Aluminum
Fork Travel: 140mm (RS 150mm)
Axle to Crown: 554mm (RS 564mm)
Fork Offset: 44mm
Rear Travel: 130mm
Wheels Size: 29"
Max Tire Size: 2.6"
Recommended Shock Sag (Measured seated): 30%
Shock Size: 210x50mm
Shock Hardware F: 25x8mm
Shock Hardware R: 30x8mm
Sizing: M/L/XL
Headtube: 44-56mm Tapered Semi-Integrated
Headset: ZS44-28.6 - T2 / ZS56/40 - B8
Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)
Seatpost: 31.6mm (Internal Routing for Dropper Seatpost)
Seat Clamp: 34.9mm
BB: Threaded 73mm BSA
Rear Hub: Boost 148x12mm
Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)
Chain Guide: ISCG05
Brake Mount: 180mm Direct Post
Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS


NUKEPROOF REACTOR 290 ALLOY - Pro (GX Eagle) - Brushed Alloy

  • Sale
  • Regular price $5,919.98